CONVERTER SYSTEM 6-21
Driven Pulley
Driven Pulley Removal
•
Remove:
Torque Converter Cover (see Torque Converter Cover
Removal)
Drive Pulley (see Drive Pulley Removal)
Drive Belt (see Drive Belt Removal)
•
Using the flywheel & pulley holder [A] and attachments
[B], remove the driven pulley nut [C] and washers. (Nut
has R/H threads.)
Special Tools - Flywheel & Pulley Holder: 57001-1343
Pulley Holder Attachment: 57001-1472
•
Remove:
Driven Pulley
Driven Pulley Disassembly
•
Hold the drive & driven pulley holder [A] in a vise.
Special Tool - Drive & Driven Pulley Holder: 57001-1473
•
Screw the guide bar [B] into the holder.
Special Tool - Spring Holder Set: 57001-1483
•
Put the driven pulley [C] on the guide bar.
•
Tighten the nut [D], and compress the spring with the
spring holder [E].
Special Tool - Spring Holder Set: 57001-1483
•
Remove the circlip [A] with circlip pliers [B].
Special Tool - Circlip Pliers: 57001-154
•
Remove the nut and spring holder [C].
•
Remove:
Spring Seats [A]
Spring [B]
Thrust Plate [C]
