Filter
Top Products
30
User Code 1 2 3 4 5 6 7 8
Location 0065 0066 0067 0068 0069 0070 0071 0072
System Times And Other Options
System Time Options - A description of each time is available in the Glossary Units Location Default
Entry delay 1 (Not to exceed 45 seconds in a UL installation)
.............................
seconds
....
0080
......
020
_______
Entry delay 2 (Not to exceed 45 seconds in a UL installation)
.............................
seconds
....
0081
......
020
_______
Exit delay (Not to exceed 60 seconds in a UL installation)
..................................
seconds
....
0082
......
030
_______
Alarm cut off and reset (Not to be less than 4 minutes in a UL installation)
.........
minutes
.....
0083
......
005
_______
* Duration between fire, tamper, trouble chirps
..................................................
seconds
....
0086
......
005
_______
* Duration for recognition of AC power loss
.......................................................
minutes
.....
0097
......
001
_______
Duration between spoken "Pre-alarm" cycles (000 = 3 seconds)
.........................
seconds
....
0099
......
000
_______
Fire siren tone duration before speech
................................................................
seconds
....
0101
......
005
_______
Burglary siren tone duration before speech
.........................................................
seconds
....
0102
......
005
_______
Fire cut off and reset (Not permitted in a UL installation)
....................................
minutes
.....
0100
......
005
_______
Number of 4 second samples to determine loss of phone line
............................
samples
....
0456
......
006
_______
Time frame for User Test Timeout
........................................................................
minutes
.....
0098
......
003
_______
Answer service callback override wait time
........................................................
seconds
....
0470
......
025
_______
Number of rings for pickup (minimum of 002, 000 disables )
.............................
rings
.........
0458
......
010
_______
Inactivity time before automatic hang up while in user phone access
.................
seconds
....
0556
......
015
_______
Inactivity time before automatic hang up/exit when programming
......................
seconds
....
0557
......
060
_______
Delay before dialing after activation Phone #1 (000 - disables)
..........................
seconds
....
0437
......
002
_______
Delay before dialing after activation Phone #2 (000 - disables)
..........................
seconds
....
0438
......
002
_______
Off-hook time during listen-in before automatic hang-up (000 - 256 seconds)
....
seconds
....
0453
......
120
_______
Central Station handshake wait period
................................................................
seconds
....
0455
......
025
_______
Two-way callback from central station wait period
.............................................
minutes
.....
0461
......
002
_______
Voice only and two-way callback wait period for a valid code
...........................
seconds
....
0465
......
060
_______
Maximum number of dialing attempts Phone #1
.................................................
attempts
....
0449
......
008
_______
Maximum number of dialing attempts Phone #2
.................................................
attempts
....
0450
......
008
_______
Touch tone (000) or pulse (001) dialing
.................................................................................
0454
......
000
_______
Ignore dial tone (for use with cellular backup) (001 - enabled)
.............................................
0466
......
000
_______
Number of disappearing code activations
...........................................................
activation
.
0073
......
001
_______
Number of retries when dialing
..........................................................................
attempts
....
0185
......
008
_______
Activations before Auto-Bypass (Not permitted in a UL installation: 000)
...........
activation
.
0115
......
000
_______
Time frame activations occur within (Not permitted in a UL installation)
............
hours
........
0116
......
024
_______
Time extended monitor is displayed on the keypad (000 - continuous)
...............
seconds
....
0175
......
030
_______
Time between speech/beeps when extended monitor is active (000 - disable)
....
seconds
....
0176
......
005
_______
* 000 disables (Must be enabled for UL installation)
User Code Options
Options : Enter total - A description of each option is available in the Glossary Location Value
Duress
...........................................................................................................................................
001
Disappearing
.................................................................................................................................
004
Enable master functions - bypass mode, extended monitor, user code changes
.............................
008
Works on remote telephone
...........................................................................................................
016
Works on keypads
..........................................................................................................................
032
Works on local telephones
.............................................................................................................
064
Generate open report to CS and/or Event Memory log
...................................................................
002
Generate close report to CS and/or Event Memory log
...................................................................
128
Default - User code 1 (all others default 000)
..............................................................
0065
.......
250
Program Mode Access Code Options
............................................................................
0549
.......
048