Filter
Top Products
42
Button Functions: These are activations that are controlled by portable transmitters and/or key
combinations on keypads.
Silence Day Zone: Cancels a day zone and extended monitor activation.
Speak Long Term Memory: The system maintains a long term alarm memory for all alert
activations. This is useful for identifying zones that cause the system to go into alarm.
The zone activations can be retrieved by entering a valid user code followed by the 8
key. The system will speak up to 8 alert activations in order starting with the most
recent.
Speak Status: Speak current system status.
Speak Time: Assign to a key to speak system time.
Toggle Monitor: Toggle the monitor mode.
24 Hour Emergency: Initiate an emergency alarm.
Trigger a Relay: Sends on/off command to relay from a portable transmitter or keypad.
24 Hour Fire: Initiate a fire alert activation.
24 Hour Panic: Initiate a panic activation.
24 Hour Silent: Initiate a silent alarm activation.
Extended Monitor: Toggle Extended Monitor on/off
Enter Bypass Mode: Places the system in Bypass Mode. This function is only to be used
with keypads and phone.
Set Time: Places the system in Set Time mode. This function is only to be used with
keypads.
Step Arming: Each time a step arming button is depressed, the system steps the arming
stage in order between the following stages. Starting with the system disarmed, the first
press will arm the system to AWAY. A second press, before exit delay time expires, will
arm the system to HOME. A third press, or a second press after exit time has expired, will
disarm the system. Arming to Night is not available with step arming. Even if force
arming is not programmed, the system will always force arm any open zones when step
arming is used. Step arming is not permitted in a UL installation.
Arm to AWAY/HOME: Force Arms (even with force arming disabled) the panel to
AWAY or HOME.
Disarm: Disarms the panel