Filter
Top Products
37
Two-Way Digit Assignments
This feature is not permitted in a UL installation
Telephone Digit Default Function Location Default Value
0 Exit 2-way by going to keypad mode or hanging up
..............................
0162
...................
000
1 Microphone #1 On
................................................................................
0163
...................
001
2 Microphone #2 On
................................................................................
0164
...................
002
3 Microphone #3 On
................................................................................
0165
...................
003
4 Microphone #1 Off
................................................................................
0166
...................
004
5 Microphone #2 Off
................................................................................
0167
...................
005
6 Microphone #3 Off
................................................................................
0168
...................
006
7 High microphone sensitivity
..................................................................
0169
...................
007
8 Normal microphone sensitivity
..............................................................
0170
...................
008
9 All microphones on
...............................................................................
0171
...................
009
* Listen
.....................................................................................................
0172
...................
010
# Talk
........................................................................................................
0173
...................
011
Rearrange Keypad phone digits (001 to change from default)
................
0161
...................
000
Two-way key functions: It is not recommended to alter the telephone digit assignments for two-way voice, however,
to conform to some central stations this process may be necessary. To reassign the assignments, place a 001 in
location 0161. Each of the two-way functions are listed along with the digit assigned. By altering the location
values, each function can be reassigned to a new key digit. Take care when altering key assignments not to program
a single digit to have multiple functions. The system will only expedite one function per telephone digit. Two-way
voice is not permitted in a UL installation.
Two-Way Voice Options
This feature is not permitted in a UL installation
Voice Only Options - Enter total Value
One Digit Access
..........................................................................................................
001
Full User Code Access
..................................................................................................
002
The 0 digit exits to keypad mode
..................................................................................
008
Two Way Callback Options
One Digit Access
..........................................................................................................
016
Full User Code Access
..................................................................................................
032
The 0 digit exits to keypad mode
..................................................................................
128
Default
.............................................................................................
0464
...................
008
Central stations that do not support two-way voice after a communicator transmission may require two-way callback.
With this option enabled (System Option Group 3) the control panel will wait a programmed period of time (0461)
after a digital communication for the central station to call. Two-way voice is not permitted in a UL installation.
The Voice only option is used for any reporting that is not a central station. Most commonly, this option is used for
two-way calls to a user's office phone or a numeric pager.
There are three security options associated with two-way callback and voice only reporting: One digit access, full
code access, and entering 0 to exit to keypad mode. If either of the access code options are selected, the panel will
answer the phone and play a repeated beep until a valid code is entered or the two-way callback time expires. If
neither code option is selected, the system will be in listen-in mode when the phone is answered. Without the
"0 exits to keypad mode" options selected, the central station will not have access to keypad mode.
When using a number pager, do not select one digit or full access code options and the panel will only make one
dialing attempt.