Filter
Top Products
K1 - 11
1.0 Technical Data/Machine Layout/Transport and Installation of the Machine/Safety Relevant Machine Elements
Technical Data
Cutting width 67 cm / 26,38"
Clamp opening 8 cm / 3,15"
Feed depth 67 cm / 26,38"
Power requirement (main motor):
Single phase A C 2,2 kW / 3,1 H.P.
3 phase 2,4 kW / 3,4 H.P.
Net weight 620 kg / 1367 lbs
Width 125 cm / 49,2"
Length 182,5 cm / 71,85"
Height 151,5 cm / 59,64"
Front table length 67 cm / 26,38"
Table height 90 cm / 35,43"
Clamp pressure, min. 200 daN / 440 lbs
max. 1500 daN / 3300 lbs
Knife thickness 9,7 mm / 0,38"
Grinding reserve, max. 2,2 cm / 0,86"
Smallest cut
without false clamp, min. 1,5 cm / 0,6"
with false clamp, min. 5 cm / 1,96"
Backgauge speed 0 - 7 cm/sek.
Knife speed/min.20
daN = kp
Voltage supply (3 phase) 200 - 240, 50/60Hz
Fusing 3 x 25A
Voltage supply (3 phase) 360 - 420V, 50/60Hz
Fusing 3 x 16A
Voltage supply single phase AC (200 - 240, 50Hz)
Fusing 1 x 32A
Voltage supply single phase AC (210 - 240, 60Hz)
Fusing 1 x 32A
Attention!
The wire cross section of the main power supply according to the coun-
trys regulations.
Same regulations according the plug connectors.
Noise emission
Metering of noise level according to DIN EN 13023, LpA (dB):
76,5 with 300 cuts/hour (manual feeding)
79,5 with 600 cuts/hour (manual feeding)
Extraneous and room noise correction has been carried out.