Filter
Top Products
K5D - 3
Subtraction Repetition Unit
5.0 Automatic Operation
Fast and easy programming of a sequence of equal cut sizes.
Procedure:
1. Move backgauge to desired initial position
2. Select "Auxiliary Functions" with key
3. Select "Subtraction Repetition Unit"
4. Enter label size (e.g.: 2 cm)
5. Make cut
After each cut backgauge moves forward 2cm until backgauge reaches the front
limit position.
Note:
The label size can be changed during this process.
After backgauge has reached the front limit position, backgauge moves back to
the initial position.
Quitt the function
Quitt the function by selecting the function once more or by pressing key
"Automatic ON"
Graphics OFF
Switching OFF the graphic window of a Block Program shown in the Program
Data display.
activated function