Filter
Top Products
K5A - 2
Introduction
Functions of the menu keys*
Key "Main menu (Function Survey)"
Select language
Select measuring unit
Service
Knife compensation
Resting time for knife at BDC
Maintenance cut counter
Preset functions
Reference run
Adjustment of display contrast
Correction of current position
Block programming
Help
Menu key "Additional Functions"
Automatic ejector OFF
Jogging mark
Help
Menu key "Machine Parameters"
Pre-pressing time
Resting time for knife at BDC
Menu key "Auxiliary Functions"
Programming with cut
Sheet size tables
Subtraction repetition unit
Graphics OFF
Help
Direct keys: Automatic Function ON, Automatic Function OFF, Program Selection,
Numerical Keyboard (with 4 fundamental operations of arithmetic),
Correction, Insert, Delete, Store, Cursor Keys, Backgauge Movement with
Electronical Hand Wheel
A position (cut size) entered via numerical keyboard can be stored permanently.
Any number of cut sizes necessary for the processing of a pile of material can be input
and stored.
All the data (cut sizes, information, additional functions) concerning one particular order
can be stored under one program number.
Cut sizes can also be stored automatically when a cut is triggered.
A programmable automatic function enables the advance movement of the cutting
material to the next position stored once a cut has been performed.
The machine is provided with a subtraction repeat unit to process invariable cutting
sequences in a fast and simple way.
All the data and information are shown on four basic displays:
1. Program Data
2. Program Information
3. Main menu (Function Survey )
4. Program Directory
Program Data display and Program Information display are meant for the input of cut
sizes or the display of additional information concerning a particular program.
Operator prompting on all display levels and input of clear text via softkey input (function
pictographs (symbols) on the display)
The Program Directory display shows all the assigned programs contained in the memory.
By means of the Function Survey display it is possible to select various machine
functions.
The keyboard of the operating panel with its menu keys makes it possible to store additio-
nal functions for individual cut sizes, which accompany and facilitate or accelerate the
working sequence.
* Technical alterations reserved!