Filter
Top Products
K5E - 2
With spongy or soft stock it is recommended to increase the clamping time
before the actual cut.
The adjusted pre-pressing time is the period between start of clamping and
initiation of cut. For this purpose, 9 pre-clamping grades are available.
Make selection:
Select prepressing time: < selection display is shown >
Adjustment of pre-pressure time:
Select desired prepressing time grade by entering the clamping grade
number
< after seletion the Program Data display appears >
_________________________________________________________________
Resting time for knife at BDC
By means of this function the time period "knife in bottom dead center (BDC)"
can be adjusted.
Adjustment of BDC time
Select desired time grade by entering the time grade number (1 - 9) with
the numerical keyboard
< after selection the Program Data display appears >
5.0 Automatic Operation
Prepressure Time