Filter
Top Products
E - 7
Introduction
BAUM cutting machines form a part of the wide range of products manufactured by the BAUM company.
Decades of experience in constructing high speed cutting machines and peripheral equipment, together with state-of-the-art engineering and manufacturing procedures,
careful testing and highest quality standards ensure the reliability and performance of your BAUM machine.
Please pay special attention to the following information:
• The section on “Safety” in the operating instructions!
• The operating instructions are not meant as an instruction for repair. Such work should be carried out by BAUM service, exclusively.
• Use only original BAUM spare parts; indicate type and machine number in your requests.
• Illustrations in the operating instructions/spare parts catalogue may deviate from the real design. Nevertheless, the information given is not altered by this.
• The use of the aids mentioned in the operting instructions, such as oils, greases, cleansing agents etc. refers to the preparation date of these instructions.
The complete Technical Documentation should always be kept near the machine.
We recommend to read these operating instructions carefully prior to commissioning the machine, because we shall not be liable for any damage or breakdown resulting
from any nonobservance of these operating instructions.
Copyright
All rights reserved for this document. No part of it may be duplicated or brought to the notice of other people in any form without our express consent.
Any violation engages to damages.
The Operating Instructions must be stored for future use!