Filter
Top Products
Chapter 11: QoS Configuration Guide
182 SmartSwitch Router User Reference Manual
• Layer-3 source-destination flows
• Layer-4 source-destination flows
• Layer-4 application flows
Configuring IP QoS Policies
To configure an IP QoS policy, perform the following tasks:
1. Identify the Layer-3 or 4 flow and set the IP QoS policy.
2. Specify the precedence for the fields within an IP flow.
Setting an IP QoS Policy
To set a QoS policy on an IP traffic flow, enter the following command in Configure mode:
Specifying Precedence for an IP QoS Policy
To specify the precedence for an IP QoS policy, enter the following command in Configure
mode:
Configuring IPX QoS Policies
To configure an IPX QoS policy, perform the following tasks:
1. Identify the Layer-3 or 4 flow and set the IPX QoS policy.
2. Specify the precedence for the fields within an IPX flow.
Set an IP QoS policy
qos set ip
<name>
<priority>
<srcaddr/mask>
|any
<dstaddr/mask>
|any
<srcport>
|any
<dstport>
|any
<tos>
|any
<interface-list>
|any
<protocol>
Specify precedence for an
IP QoS policy.
qos precedence ip [sip
<num>
] [dip
<num>
]
[srcport
<num>
] [destport
<num>
]
[tos
<num>
] [protocol
<num>
] [intf
<num>
]