Filter
Top Products
Chapter 1: SmartSwitch Router Product Overview
32 SmartSwitch Router User Reference Manual
Show the SNMP community strings.
snmp show community
Show SNMP related statistics.
snmp show statistics
Show trap target related configuration.
snmp show trap
Show the active configuration of the system.
system show active-config
Show the contents of the boot log file, which
contains all the system messages generated
during bootup.
system show bootlog
Show the most recent Syslog messages kept in
the local syslog message buffer.
system show syslog buffer
Show the contact information (administrator
name, phone number, and so on).
system show contact
Show the SSR date and time.
system show date
Show the IP addresses and domain names for
DNS servers.
system show dns
Show SSR hardware information.
system show hardware
Show SSR location.
system show location
Show SSR name.
system show name
Show the type of Power-On Self Test (POST)
that should be performed.
system show poweron-selftest-
mode
Show the configuration changes in the
scratchpad. These changes have not yet been
activated.
system show scratchpad
Show the startup configuration for the next
reboot.
system show startup-config
Show the IP address of the SYSLOG server
and the level of messages the SSR sends to the
server.
system show syslog
Lists the last five Telnet connections to the
SSR.
system show telnet-access
Show the default terminal settings (number of
rows, number of columns, and baud rate.
system show terminal
Show SSR uptime.
system show uptime
Show the software version running on the
SSR.
system show version
Task Command