Filter
Top Products
Chapter 2: Bridging Configuration Guide
44 SmartSwitch Router User Reference Manual
Configuration Examples
Creating an IP or IPX VLAN
VLANs are used to associate physical ports on the SSR with connected hosts that may be
physically separated but need to participate in the same broadcast domain. To associate
ports to a VLAN, you must first create an IP or IPX VLAN and then assign ports to the
VLAN.
For example, servers connected to port gi.1.(1-2) on the SSR need to communicate with
clients connected to et.4.(1-8). You can associate all the ports containing the clients and
servers to an IP VLAN called ‘BLUE’.
First, create an IP VLAN named ‘BLUE’
Next, assign ports to the ‘BLUE’ VLAN.
Show l2 table information on a
specific port.
l2-tables show port-macs
Show information the master MAC
table.
l2-tables show mac-table-stats
Show information on a specific
MAC address.
l2-tables show mac
Show information on MACs
registered.
l2-table show bridge-management
Show all VLANs.
vlan list
ssr(config)# vlan create BLUE ip
ssr(config)# vlan add ports et.1.(1-8), gi.1.(1-2) to BLUE