Filter
Top Products
Introduction
1-4 Software Conventions
¥ Double-clicking means to position the mouse pointer over the indicated
target, then press and release the mouse button two times in rapid succession.
This is commonly used to activate an objectÕs default operation, such as
opening a window from an icon. Note that there is a distinction made between
Òclick twiceÓ and Òdouble-click,Ó since Òclick twiceÓ implies a slower motion.
¥ Pressing means to position the mouse pointer over the indicated target, then
press and hold the mouse button until the described action is completed. It is
often a pre-cursor to Drag operations.
¥ Dragging means to move the mouse pointer across the screen while holding
the mouse button down. It is often used for drag-and-drop operations to copy
information from one window of the screen into another, and to highlight
editable text.
Common NB-30 Bridge Window Fields
Similar descriptive information is displayed in boxes at the top of most
device-speciÞc windows in SPECTRUM Element Manager, as illustrated in
Figure 1-2, below.
Figure 1-2. Sample Window Showing Informational Text Boxes
Device Description
Displays the SNMP MIB-II System Description for the bridge. This is a read-only
description used to identify the hardware type and Þrmware/software operating
system of the managed device.
IP Address
Device
Description
MAC
Address