Filter
Top Products
Viewing Chassis Information 2-5
The NB-30 Bridge Chassis View
The Device Menu
From the Device Menu at the Chassis View window menu bar, you can access the
following selections:
¥ Device Type..., which displays a window containing a description of the
device being modeled: NB-30 - Remote Bridge.
¥ System Group..., which allows you to manage the NB-30 Bridge via SNMP
MIB II. Refer to the Generic SNMP UserÕs Guide for further information.
¥ Bridge Status..., which opens a window that provides an overview of bridging
information for each port, and allows you to access all other bridge-related
options. Refer to Chapter 3, NB-30 Bridging, for more information.
¥ Exit, which closes the NB-30 Bridge Chassis View window.
The Utilities Menu
The Utilities menu provides access to the MIB Tools utility provided by
SPECTRUM Element Manager for use with the NB-30. The MIB Tools utility
provides direct access to the NB-30Õs MIB information. This selection is also
available from the Tools menu at the top of SPECTRUM Element ManagerÕs main
window.
Refer to your Tools Guide for information on the MIB Tools utility.
The Help Menu
The Help Menu has three selections:
¥ MIBs Supported, which brings up the Chassis Manager window; see Chassis
Manager, page 2-6, for more information.
¥ Chassis Manager Help, which brings up a help window with information
speciÞcally related to using the Chassis Manager and Chassis View windows.
¥ About Chassis Manager... which brings up a version window for the Chassis
Manager application in use.
The Board Menu
The Board menu for the NB-30 Bridge provides a single selection (which is also
available from the Bridge Status window):
¥ Disable/Enable Bridge, which enables or disables bridging across the NB-30.