Filter
Top Products
NB-30 Bridging
3-32 Resetting Bridge Counters
¥ All Spanning Tree Algorithm information screens back to their default values.
You must also restart the bridge for the new Spanning Tree information to
take effect.
¥ Ageing Time on Filtering Database Screen back to 300 seconds
¥ DSX-1 Test Pattern to Alternate 1/0s
¥ DSX-1 Channel Assignment returns to all Enabled (read-only from remote
management)
The following operating parameters can only be accessed through Local
Management or via the MIB Tools utility. Restored defaults will be evident in the
next Local Management session. Refer to your NB-30 Local Management
documentation for more information.
¥ Bridge Name back to CABLETRON REMOTE BRIDGE
¥ Ethernet Port 2 Name to ETHERNET PORT 2
¥ Net Name for Enet Port 2 to LAN_2
¥ Number of Restarts to 0
¥ Default Ethernet Port to Port 1
¥ Enable Redundancy to NO
¥ Redundancy Poll Address (Ethernet Port 1/2) to 00-00-00-00-00-00
¥ Redundancy Poll Interval (Ethernet Port 1/2) to 5 seconds
¥ Redundancy Poll Max Retries to 6
¥ Type of Filtering to IEEE 802.1
¥ DSX-1 Channel Assignment returns to all Enabled
To reset parameters to their defaults:
1. Click on Bridge. A menu will appear.
2. Select Restore Defaults.
Resetting Bridge Counters
You can use the Reset Counters option to reset all statistics counters at the device
back to zero. To do so:
1. Click on Bridge. A menu will appear.
2. Select Reset Counters.
Restarting the Bridge
You can use the Restart Bridge option to force the bridge to undergo a software
reset. This will clear all statistics counters at the device back to zero and cause the
Spanning Tree to be reconÞgured.
1. Click on Bridge. A menu will appear.
2. Select Restart Bridge.