Filter
Top Products
The NB-30 Bridge Chassis View
2-8 Managing the Bridge
Setting the Device Date and Time
The Device menu provides access to two methods for changing the date and time
stored in the deviceÕs internal clock: you can select the Edit Device Time and Edit
Device Date options from the menu itself, or you can use the I-bar cursor at the
appropriate Þeld in the Bridge Status window; see Chapter 3, NB-30 Bridging, for
more information.
To edit the device time:
1. Click on Device on the Chassis View window menu bar to access the Device
menu; drag down to Edit Device Time, and release. The following change
window, Figure 2-6, will appear.
Figure 2-6. Edit Time Window
2. Enter the new time in a 24-hour hh:mm:ss format, either by highlighting the
field you wish to change and using the up and down arrow buttons, or by
simply entering the new value in the appropriate field.
3. Click on OK to save the changes, or on Cancel to exit without changes.
To edit the device date:
1. Click on Device on the Chassis View window menu bar to access the Device
menu; drag down to Edit Device Date, and release. The following change
window, Figure 2-7, will appear.
Figure 2-7. Edit Date Window