Filter
Top Products
Chapter 4 System Startup and Basic System Configuration
Cisco IOS User Interface
4-28
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
OL-11496-01
Step 3 Enter the configure terminal command to enter global configuration mode.
Milo# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Milo(config)#
Step 4 Enter the interface type slot/port command to enter interface configuration mode.
Milo(config)# interface type slot/port
Milo(config-if)#
Step 5 Enter the copy running-config startup-config command to save your
configuration settings.
Milo# copy running-config startup-config
Your system is now minimally configured and able to boot using the configuration
you entered.
Verifying Running Configuration File Settings
The show running-config command lets you check the settings in the running
configuration file.
The following example displays the output for a Quad OC-3c/STM-1c POS
interface installed in slot 1.
router# show running-config
Building configuration...
Current configuration:
!
version 12.0
no service pad
no service udp-small-servers
no service tcp-small-servers
!
hostname Milo
!
enable secret 5 $1$W6K5$W/p5Bq6IPLGJ/hS9VVP1g.
enable password twink
interface POS1/0
ip address 10.1.1.1 255.255.255.0
crc 32