Filter
Top Products
Crestron TPMC-4XG-B Isys i/O™ Handheld WiFi Touchpanel
Configuring the Touchpanel
When power is applied to the unit for the first time, the following screen appears.
Initial Opening Screen
Touch Setup with the stylus or your finger to display the following TPMC-4XG-B
setup screen.
Setup Screen
The setup screen enables basic configuration procedures prior to regular operation of
the touchpanel.
NOTE: During regular operation of the touchpanel, there are three ways to activate
the setup functions. Either place a button on the project main page and assign the
reserved join number (17242) that activates Setup or hold your finger on the screen,
use the stylus to press the Reset button (located inside the battery compartment),
replace the battery cover and continue to keep your finger on the screen until the
setup screen appears (about 30 seconds). If the system bar is visible at the top of the
Operations Guide – DOC. 6749A Isys i/O™ Handheld WiFi Touchpanel: TPMC-4XG-B • 13