Filter
Top Products
Vigor2900 Series User’s Guide
39
PPPoE Link Click Enable for activating this function. If you click Disable, this
function will be closed and all the settings that you adjusted in this
page will be invalid.
ISP Name Type in the ISP Name provided by ISP in this field.
Username Type in the username provided by ISP in this field.
Password Type in the password provided by ISP in this field.
Index (1-15) in
Schedule Setup
You can type in four sets of time schedule for your request. All the
schedules can be set previously in Application – Schedule web
page and you can use the number that you have set in that web
page.
ISDN Dial Backup
Setup
This setting is available for the routers supporting ISDN function
only. Before utilizing the ISDN dial backup feature, you must
create a dial backup profile first. Please click Internet Access
Setup > Dialing to a Single ISP to enter the backup profile.
Due to the absence of the ISDN interface in some models (e.g.,
Vigor2900V and Vigor2900VG), the ISDN dial backup feature and
its associated setup options are not available to them. Please refer to
the previous part for further information.
None - Disable the backup function.
Packet Trigger -The backup line is not on until a packet from a
local host triggers the router to establish a connection.
PPP Authentication Select PAP only or PAP or CHAP for PPP.
Always On Check this box if you want the router keeping connecting to Internet
forever.
Idle Timeout Set the timeout for breaking down the Internet after passing through
the time without any action.
Fixed IP Usually ISP dynamically assigns IP address to you each time you
connect to it and request. In some case, your ISP provides service to
always assign you the same IP address whenever you request. In this
case, you can fill in this IP address in the Fixed IP field. Please
contact your ISP before you want to use this function. Click Yes to
use this function and type in a fixed IP address in the box.
Fixed IP Address Type a fixed IP address.
WAN IP Alias If you have multiple public IP addresses and would like to utilize
them on the WAN interface, please use WAN IP Alias. You can set
up to 8 public IP addresses other than the current one you are using.