Filter
Top Products
Vigor2900 Series User’s Guide
43
PING Interval - Enter the interval for the system to execute the
PING operation.
WAN physical type Check and choose a proper type used for duplex between this device
and other router that you want to communicate. Both sides should
use the same physical type; otherwise, the connection might be
failed due to inconsistent type. It is recommended for you to set
Auto negotiation as the physical type.
RIP Protocol Routing Information Protocol is abbreviated as RIP（RFC1058）
specifying how routers exchange routing tables information. Check
Enable RIP for activating this function.
BPA Setup This setting is useful for Australia only.
BPA Enable - Check this box to activate this function.
Login Server - Select any one of the login server for your device.
User Name - Type the user name obtained from ISP.
Password - Type the password obtained from ISP.
WAN IP Network
Settings
This group allows you to obtain an IP address automatically and
allows you type in IP address manually.
Obtain an IP address automatically – Click this button to obtain
the IP address automatically if you want to use Dynamic IP mode.
Router Name – Type in the router name provided by ISP.
Domain Name – Type in the domain name that you have assigned.
Default MAC Address – Click this radio button to use default MAC
address for the router.
Specify a MAC Address - Some Cable service providers specify a
specific MAC address for access authentication. In such cases you
need to click the Specify a MAC Address and enter the MAC
address in the MAC Address field.
WAN IP Alias - If you have multiple public IP addresses and would
like to utilize them on the WAN interface, please use WAN IP Alias.
You can set up to 8 public IP addresses other than the current one
you are using.