Filter
Top Products
Vigor2900 Series User’s Guide
46
Idle Timeout - Set the timeout for breaking down the Internet after
passing through the time without any action.
IP Address
Assignment
Method(IPCP)
Fixed IP - Usually ISP dynamically assigns IP address to you each
time you connect to it and request. In some case, your ISP provides
service to always assign you the same IP address whenever you
request. In this case, you can fill in this IP address in the Fixed IP
field. Please contact your ISP before you want to use this function.
Click Yes to use this function and type in a fixed IP address in the
box.
Fixed IP Address -Type a fixed IP address.
LAN2/WAN IP
Network Settings
Obtain an IP address automatically – Click this button to obtain
the IP address automatically.
Specify an IP address – Click this radio button to specify some data.
IP Address – Type the IP address.
Subnet Mask – Type the subnet mask.
WAN physical type Check and choose a proper type used for duplex between this device
and other router that you want to communicate. Both sides should
use the same physical type; otherwise, the connection might be
failed due to inconsistent type. It is recommended for you to set
Auto negotiation as the physical type.
2
2
.
.
6
6
.
.
5
5
L
L
2
2
T
T
P
P
To choose L2TP as the accessing protocol of the internet, please select Internet Access Setup
on the Quick Setup page. Next, choose the L2TP link. The following web page will be
shown.