Appendix A
312359J 73
Alarm Control Screens
The Alarm control screens enable users to view alarm
diagnostic information, alarm logs, and pump batch and
grand totals. These screens also enable users to view
maintenance information for pump and check valves,
including the maintenance schedule.
NOTE:
If the potlife timer is enabled, displays.
Alarm
The Alarm screen displays the specific alarm code.
There are two levels of error codes: alarms and adviso-
ries. A solid bell icon with an exclamation point and
three audible alerts indicate a alarm. And an outlined
hollow bell icon and a single audible alert indicate an
advisory.
Additionally, this screen displays the location of the error
with the top view and side view of the system. Refer to
the following table and subsections for more details.
Alarm Log
View details regarding alarms received, including the
date, time, and alarm code for the last 16 alarms. Up to
four pages of alarms are available.
Press to access the alarm log. The press
and to scroll through each page of alarms.
Icon Function
Go to Alarm log. Use up and down arrows
to scroll through list of the past 16 errors.
Go to totalizer screen. Allows users to view
the grand and batch totals for each pump
and both pumps combined.
Icon Function
Go to maintenance screen. Allows user to
view maintenance information but not make
changes.See Maintenance Setup 2, page
67.
Flush confirm. Use when the potlife timer is
enabled. Press button to confirm flush
before a potlife advisory is issued.
Amount of material moved through pump
that will result in a maintenance warning.
Amount of material moved through dosing
valve that will result in a maintenance warn-
ing.
Number of days between maintenance
cycles that will result in a reminder advi-
sory.
Clear batch totalizers or maintenance
counters.