Filter
Top Products
-12-
Model G0795 (Mfd. Since 02/15)
SECTION 3: SETUP
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover any damage, please call us immediately
at (570) 546-9663
for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi
-
tion of your shipment, inventory the contents.
Unpacking Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Figure 4. Toolbox inventory.
A
B
C
D
E
F
G
H
I
J
KL
Small Item Inventory (Figure 4) Qty
A. Drawbar
7
⁄16"–20" x 3
1
⁄2" .............................. 1
B. T-Bolt M10-1.5 x 60 w/Washer and Nuts .... 2
C. Drill Chuck B16, 3-16mm ............................ 1
D. Drill Chuck Key. .......................................... 1
E. Spindle Sleeve R-8 .................................... 1
F. Bottle for Oil ............................................... 1
G. Toolbox ....................................................... 1
H. Phillips Head Screwdriver #2 ..................... 1
I. Flat Head Screwdriver #2 ........................... 1
J. Hex Wrenches 2.5, 3, 4, 5, 6mm .........1 Ea.
K. Open-End Wrench 17/19mm ...................... 1
L. Spindle Wrench .......................................... 1
M. Handwheel Handle Assembly (not shown) . . 2
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
The following items are needed, but not included,
for the setup/assembly of this machine.
Description Qty
• Additional People ....................................... 1
• Safety Glasses ........................................... 1
• Cleaner/Degreaser (Page 13) .... As Needed
• Disposable Shop Rags ............... As Needed
• Forklift ......................................................... 1
• Lifting Sling (rated for at least 1000 lbs.) .... 1
• Mounting Hardware (Page 15) ... As Needed
• Brass Hammer (Page 16) .......................... 1
• Mineral Spirits (Page 16) ............ As Needed
• Wood Block (Page 16) ............................... 1
Needed for Setup