Filter
Top Products
Model G0795 (Mfd. Since 02/15)
-33-
SECTION 6: MAINTENANCE
NOTICE
The recommended lubrication is based on
light-to-medium usage. Since lubrication
helps to protect value and operation of
machine, these lubrication tasks may need
to be performed more frequently than rec-
ommended, depending on usage.
Failure to follow reasonable lubrication
practices as instructed in this manual could
lead to premature failure of machine com-
ponents and will void the warranty.
Metal chips left on the machine that have been
soaked with water-based coolant will invite oxida-
tion and a gummy residue build-up around the
moving parts. Use a brush and shop vacuum to
remove chips and debris from the working sur-
faces of the mill/drill. Never blow off the mill/drill
with compressed air, as this will force metal chips
deep into the mechanisms and may cause injury
to yourself or bystanders.
Remove any rust build-up from unpainted cast
iron surfaces of your mill/drill and treat with a non-
staining lubricant after cleaning.
Keep unpainted cast iron surfaces rust-free with
regular applications of ISO 68 way oil (see Page
28 for offerings from Grizzly).
Cleaning &
Protecting
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
• Loose mounting bolts.
• Damaged saw blade.
• Worn or damaged wires.
• Clean debris and built up grime off of machine.
• Any other unsafe condition.
Every 8 Hours of Operation:
• Check/add headstock oil (Page 34).
• Lubricate ball oilers (Page 35).
• Lubricate table and column ways (Page 35).
• Lubricate quill outside surface (Page 36).
Every 40 Hours of Operation:
• Lubricate table leadscrews (Page 36).
Every 90 Hours of Operation:
• Lubricate column leadscrew, nut, and pinion
gear (Page 37).
• Lubricate quill rack and pinion (Page 37).
Annually:
• Change headstock oil (Page 34).
Schedule
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.