Filter
Top Products
Model G0795 (Mfd. Since 02/15)
-57-
Labels & Cosmetics
REF PART # DESCRIPTION REF PART # DESCRIPTION
701 P0795701 HEASTOCK FACE LABEL 705 P0795705 ELECTRICITY LABEL
702 P0795702 HANGING TAG 706 P0795706 GRIZZLY PUTTY TOUCH-UP PAINT
703 P0795703 MACHINE ID LABEL 707 P0795707 GRIZZLY GREEN TOUCH-UP PAINT
704 P0795704 READ MANUAL-DISCONNECT PWR LABEL 708 P0795708 GRIZZLY.COM LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
701
702
704
708
704
703
G0795 Machine Labels
(1/29/15)
• Label is actual size
• Label must be made of
oil-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
grizzly.com
Motor: 1 HP, 220V, Single-Phase, 60 Hz
Full-Load Current Rating: 6.8A
Motor Speed: 1700 RPM
Max. Distance Spindle to Column: 7-1/2"
Max. Distance Spindle to Table: 16-1/8"
Spindle Taper: R-8
Drawbar Thread Size: 7/16-20
Number of Spindle Speeds: 6
Spindle Speed Range: 115–1700 RPM
Longitudinal Table Travel: 14-3/16"
Cross Table Travel: 7-1/2"
Drilling Capacity Cast Iron: 1-1/4"
Drilling Capacity Steel: 1-3/16"
End Milling Capacity: 5/8"
Face Milling Capacity: 2-1/2"
Weight: 408 lbs.
Mfd. for Grizzly in China
Specifications
Date
S/N
WARNING!
MODEL G0795
HEAVY-DUTY BENCHTOP MILL/DRILL
To reduce the risk of serious personal injury while using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses AND a face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, adjusting, or servicing.
5. Tie back long hair, roll up sleeves, and DO NOT wear loose clothing,
gloves, or jewelry.
6. Properly set up machine before starting.
7. Always remove adjustment tools before starting.
8. Keep all guards and covers in place during operation.
9. Never use hands to secure workpiece to table during operation—use
clamps or a vise.
10. Avoid positioning hands where they could slip into rotating bits.
11. Always use a brush or vacuum to remove metal chips; DO NOT use
your hands, rags, or compressed air.
12. Never attempt to slow or stop spindle with hands or tools.
13. Always use proper feeds and speeds for operation and workpiece.
14. Never leave machine running unattended.
15. DO NOT operate when tired or under influence of drugs or alcohol.
16. DO NOT expose to rain or use in wet locations.
17. Prevent unauthorized use by children or untrained users.
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
G0795
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVEL BEFORE USING!
Change spindle
speed or rotation
direction ONLY
when spindle is
completely
stopped.
COLOR CODES
DANGER
PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
GRIZZLY BEIGE
PANTONE 7527 C
GRIZZLY GREEN
PANTONE 568C
NOTICE
PANTONE 3005 C or RAL 5005
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
706
705
705
707