Filter
Top Products
-30-
Model G0795 (Mfd. Since 02/15)
G5758—5" x 7" x 3
3
⁄4" Tilt Table
G5759—7" x 10" x 5" Tilt Table
Set your work at any angle from -45° to +45° with
these sturdy Tilt Tables. Heavy-duty construction
includes
7
⁄16" T-slots, two locking screws, and pre-
cision base.
1
⁄2" mounting slots.
Figure 35. G5758 Tilt Table.
T24799—1-2-3 Precision Parallel Blocks
T24800—2-4-6 Precision Parallel Blocks
These blocks are extremely handy for layout and
set up work. Matched blocks are hardened and
precision ground so all six sides are square to
within 0.0003".
Figure 37. T24799 and T24800 Precision
Parallel Blocks.
T24800
T24799
Figure 38. H5939 2" Boring Head Set.
H5939—Grizzly 18-Pc. R-8 Boring Head Set
This all-inclusive set features a precision 2" bor-
ing head, R-8 shank, 9 carbide-tipped boring bars
with
1
⁄2" shanks, graduated dial in 0.001"-, 0.05"-,
and 0.025" actual motion, and a carrying case.
G9806—Dial Indicator 0.05" Range x 0.0001"
H3326—Digital Indicator
1
⁄2" Range x 0.0005"
If your measuring requirements call for supreme
accuracy within a short range, this is the Dial
Indicator for you. Graduations are 0.0001" (one
ten thousandth of an inch) and range is 0.05" (five
hundredths of an inch). Fits all dial indicator mag-
netic bases.
Figure 36. Assortment of indicators.
G9806
H3326