Filter
Top Products
Introduction
The MMEMory (mass memory) subsystem commands provide access
to both the hard and flexible disk drives. The HP 16500C Logic
Analysis System supports the DOS (Disk Operating System) format on
the hard drive and both DOS and LIF (Logical Information Format) on
the flexible drive.
Refer to figure 12-1 and table 12-1 for the MMEMory Subsystem
commands syntax diagram. The MMEMory subsystem commands are:
<msus> refers to the mass storage unit specifier. INTernal0 specifies the hard
disk drive and INTernal1 specifies the flexible disk drive.
If you are not going to store information to the flexible configuration disk, or if
the flexible disk you are using contains information you need, it is advisable to
write protect your disk. This will protect the contents of the disk from
accidental damage due to incorrect commands being mistakenly sent.
• AUToload
• CATalog
• CD (change directory)
• COPY
• DOWNload
• INITialize
• LOAD
• MKDir (make
directory)
• MSI
• PACK
• PURGe
• PWD (present
working directory)
• REName
• STORe
• UPLoad
• VOLume
12–2