Filter
Top Products
DELete
Command :INTermodule:DELete {ALL|OUT|<module>}
The DELete command is used to remove a module, PORT OUT, or an entire
intermodule tree from a Group Run. The <module> parameter sent with the
delete command refers to the slot location of the module.
<module> An integer, 1 through 5 for HP 16500C alone. 1 through 10 with the HP
16501A connected.
Example OUTPUT XXX;":INTERMODULE:DELETE ALL"
OUTPUT XXX;":INTERMODULE:DELETE 1"
INTermodule Subsystem
DELete
13–6