Filter
Top Products
119
Rackmounting
Appendix A. A3312A Rackmount Installation
This appendix shows how to install the A3312A into a 1.1-meter, 1.6-meter, or 2.0-meter EIA cabinet.
WARNING! The A3312A weighs 41kg (90 lb) fully loaded. To avoid personal injury,
remove all modules before installation into the EIA cabinet. The empty weight is less than
15 kg (27 lb). Also, install A3312A storage systems first into the lower bays of the EIA
cabinet.
CAUTION! The A3312A should be installed into an EIA cabinet only by your HP service
representative.
To install the A3312A into an EIA cabinet:
1. Check the contents of the rackmount kit (see Figure 49). The number in parenthesis next to each item
is the quantity of the item included in the kit.
Figure 49. A3312A Rackmount Kit
1 - Support Rails (2) 5 - Door Snap (1)
2 - Clip Nut (8) 6 - Hinge Bracket (1)
3 - T25 Screw (8) 7 - Door (1)
4 - T15 Screw (1)