Filter
Top Products
Troubleshooting & Diagnostics
Diagnostic Information
83
Troubleshooting
Table 21. DDS Tape Module Additional Sense Codes
Code Description
00 00h No additional sense information
00 01h Filemark detected
00 02h EOP/M detected
00 03h Setmark detected
00 04h BOP/M detected
00 05h EOD detected
04 00h LUN not ready, cause not reportable
04 01h LUN becoming ready
04 02h LUN not ready, initializing command required
09 00h Track following error
0C 00h Write error
11 00h Unrecovered read error
14 03h EOD not found
15 01h Mechanical positioning error
17 00h Recovered data with no error correction applied
17 01h Recovered data with retries
18 00h Recovered data with error correction applied
1A 00h Parameter list length error
20 00h Invalid command operation code
24 00h Invalid field in command descriptor block
25 00h LUN not supported
26 00h Invalid field in parameter list
27 00h Write-protected
28 00h Not ready-to-ready transition
29 00h Power-on, reset, or bus device reset occurred
2A 01h Mode parameters changed
30 00h Incompatible medium
30 01h Cannot read media, unknown format
30 02h Cannot read media, incompatible format
30 03h Cleaning cartridge installed
31 00h Medium format corrupted
33 00h Tape length error
37 00h Parameter rounded
3A 00h Medium not present