Filter
Top Products
36
FS 4800 D DIESEL SPECIFICATIONS
Standard & CE Models
FS 4800 DIESEL MODEL
FS 4800 D 14 FS 4800 D 18 FS 4800 D 26 FS 4800 D 30 FS 4800 D 36
Saw (Standard)
-- -- -- -- --
Saw with Electric Track
-- -- -- -- --
Saw with Electric Track & Clutch
-- -- -- -- --
STANDARD FEATURES:
Blade Guard Capacity - in. (mm)
14 (355) 18 (457) 26 (660) 30 (762) 36 (914)
Max. Depth of Cut - in. (mm)
4.50 (114) 6.50 (165) 10.50 (267) 12.00 (305) 15 (381)
Blade Shaft RPM (Single speed
gearbox model only)
2,900 2,400 1,800 1,600 1,350
Approximate Blade Shaft Power
42 HP (31.3 KW)
Arbor Size - in. (mm)
1” (25.4) with single drive pin
Blade Shaft Diameter - in. (mm)
2” (51)
Quick Disconnect Blade Flange
Diameter - in. (mm)
4.50 (114) 5.00 (127) 5.00 (127) 5.00 (127) 6.00 (152)
IntelliSeal™ Blade Shaft System
500-hour service interval
Blade Shaft Bearings
2 radial ball bearing cartridges
Blade Shaft Drive
12 belts ( 4 each 3 band 3VX V-belts)
Blade Guard Attachment
Slip-on
Blade Control
Electro-hydraulic pump raises blade; switch controlled raise/lower on speed control handle;
Automatic blade depth control switch built into depth indicator – depth can be set with auto
stop function on depth indicator. Optional electric clutch - blade drive disengagement system;
Axle Front / Rear – in (mm)
1.25” (38.1mm) diameter / 4-bolt hub mount
Wheels Front / Rear
inch (mm)
6” x 2” x 1” (203mm x 51mm x 25.4mm) / 10” x 3” (254mm x 76mm)
Handlebars / Adjustment (Patent
Pending)
Multiple positioning between -4 degrees and +30 degrees, with 15 inches (381 mm) total
height adjustment.
Transmission (All Models)
Balanced dual motor hydraulic drive system.
Transmission (Rear Pivot Model)
Electrically controlled hydraulic differential system locks rear wheels for positive traction to
prevent slipping.
Control
Single linear control on console; forward, reverse, dynamic braking, neutral stop.
Max. Ground Speed – Front
Pivot Model
Innite speeds: 0 – 200 feet per minute (61 meters / minute) forward and reverse.
Max. Ground Speed – Rear Pivot
Model
Innite speeds: 0 – 200 feet per minute (61 meters / minute) forward and reverse – differential
locked.
Innite speeds: 0 – 100 feet per minute (61 meters / minute) forward and reverse – differential
unlocked.
Electric Tracking - Optional
Full time adjustable tracking operated with electric switch. (Front Pivot Model Only)
Blade Clutch - Optional
Allows engine to run without blade rotation. Operated with electric switch.
Chassis
Welded box section construction
Weight – lb. (Kg) – Uncrated
1,360 (617) 1,370 (621) 1,380 (626) 1,400 (635) 1,420 (644)
POWER SOURCE:
Engine
Diesel
Model
Yanmar
Specication
4TNV88
Max. Horsepower
48 @ 3000 RPM
Displacement (cu. in.)
133.6 cu. in. (2.19 liter)
Bore – in. (mm)
3.46 (88)
Stroke – in. (mm)
3.54 (90)
Cylinders
4
Fuel Capacity – US gallon (l)
7.8 (29.5)
Oil Capacity – quart (l)
7.8 (7.4) with lter
Air Filter
Dual Element Radial Seal with restriction indicator
Starter
Electric
Engine Coolant
Liquid (50/50 Water/Ethyl Glycol Mix) and Air