Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the VA-2002 Logo Finalizer and Upload Program
18
Figure 16: Set Transparency Box
2. Set the transparency level as required (between 0% for solid transparency
1
and
up to 100% for invisible transparency
2
).
3. Adjust the logo’s transparency by clicking one of the following:
“Set Global” to change the transparency of the whole logo, or
“Select Pixel” to change the transparency for parts of the logo with a
certain color (zoom in and then choose the corresponding pixels with
the mouse)
8.4 Setting the Fade Speed
Select the Fade Speed to set whether the logo will appear quickly or slowly.
To select the Fade Speed, using the VA-2002 Logo Finalizer and Upload
program, do the following:
1. From the Logo menu, select the Set Fadespeed command.
The Select Fade Speed box appears, as Figure 17 illustrates:
Figure 17: Select Fade Speed Box
2. Set the fade speed level as required (between 0 msec for the fastest fade speed,
and up to 10000 msec for the slowest fade speed).
1 As the example in Figure 13 illustrates
2 In the example in Figure 15, transparency is set at 80%