Filter
Top Products
Overview
3
3 Overview
The VA-2002 Multistandard Logo Generator is a unique, high quality
multi-standard (PAL and NTSC) color logo inserter for inserting a logo into a
composite video and s-Video signal. Using the VA-2002, you can:
Select a composite video or an s-Video (Y/C) input from the Preferences
tab in the VA-2002 Remote Control window, as well as from the Main
Menu on the VA-2002
Output simultaneously to both composite video and s-Video
1
Preview a logo at a local composite video and/or s-Video monitor
1
Store up to 9 logos simultaneously in non-volatile memory
In addition, the VA-2002 includes:
A menu-based control system, using a front panel LCD window, with
push buttons for navigation and control
An RS-232 port for logo selection, control and transfer to the VA-2002
Your VA-2002 is computer-independent—you only need a computer to
create
2
logos. You can transfer a logo to the VA-2002 remotely via RS-232 or
via a floppy disk.
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise-
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position your
Kramer VA-2002 away from moisture, excessive sunlight and dust
4 Your VA-2002 Multistandard Logo Generator
Figure 1, Table 1, and Table 2 define the VA-2002:
1 As the example in Figure 2 illustrates
2 Via your computer-based drawing or graphics program