Filter
Top Products
Your VA-2002 Multistandard Logo Generator
5
Table 1: Front Panel VA-2002 Multistandard Logo Generator Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 LCD Display Screen Displays relevant data (default) or the Main Menu (when the OK
button or the ESC button are pressed)
3
Button
Moves up one step in the LCD display screen
4
Button
Moves down one step in the LCD display screen
5 OK Button Press to confirm a command
6 ESC Button Press to stop the execution of a command
7 INSERT Button Press to turn the logo On or Off
1
8 Floppy Disk Drive Green LED Lights when reading data from a floppy disk
9 Floppy Disk Drive Insert a floppy disk in the floppy disk drive to transfer a logo
Table 2: Rear Panel VA-2002 Multistandard Logo Generator Features
# Feature Function
10 RS-232 DB 9 Connector Connects to PC or Serial Controller
11 CV BNC Connector Connects to the composite video monitor
2
12
MONITOR
Y/C 4p Connector Connects to the s-Video monitor
2
13 CV BNC Connector Connects to the composite video acceptor
14
OUTPUT
Y/C 4p Connector Connects to the s-Video acceptor
15 CV BNC Connector Connects to the composite video source
16
INPUT
Y/C 4p Connector Connects to the s-Video source
17 Power Connector with FUSE AC connector enabling power supply to the unit
1 When displaying the logo, the INSERT button illuminates (after blinking momentarily)
2 When previewing a logo at a local monitor (composite video and/or s-Video), the logo only appears at these MONITOR
outputs, and not at the OUTPUT connectors. You can set the MONITOR outputs to function as an additional pair of
OUTPUT connectors (see section 9.1)