Filter
Top Products
OPERATION
B-6 B-6
RANGER 8
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
Summary of Welding Processes
CONTROL ELECTRODE
CABLE IDLE WHEN NOT TO START
PROCESS USED MODE WELDING WELDING
STICK No AUTO Hot Touch electrode to work.
Welding starts immediately
and engine goes to high
idle.
TIG/K7930-1/K938-1, Yes HIGH Cold Press Amptrol, contactor
K936-( ) /K892-1 closes, welding
(WITH AMPTROL) starts immediately.
WIRE FEED, LN-25 WITH No AUTO Cold Press gun trigger, LN-25
INTERNAL CONTACTOR contactor closes. Welding
starts immediately and
engine goes to high idle.
NOTE: Output Control
must be set above “3”.
WIRE FEED, LN-7 WITH Yes HIGH Cold Press gun trigger,
K240 CONTACTOR KIT contactor closes. Welding
starts immediately.