Filter
Top Products
C-4
ACCESSORIES
C-4
K1450-”L” - Extension cables are available in
lengths “L” of 12, 16 or 25 ft. (3.6, 4.9 or 7.6) to match
the control to Feeder cable length used.
K683-1 DUAL PROCEDURE SWITCH
Requires K686-2 Adapter for LN-10. Kit includes gun
switch, and mountings for Lincoln Innershield and
Magnum guns, with 15 ft. (4.5 m) control cable and 3-
pin plug. K686-2 Adapter permits 3-pin plug and 5-pin
gun trigger plug to be connected to LN-10 5-pin
Trigger/Dual Procedure receptacle.
K683-3 DUAL PROCEDURE SWITCH
Kit includes gun switch, and mountings for Lincoln
Innershield and Magnum guns, with 15 ft. (4.5m) con-
trol cable and 5-pin plug with two leads to connect to
gun trigger.
SPINDLE ADAPTERS:
K162H (Not required for LN-10 Bench Models)
Spindle for boom mounting Readi-Reels and 2" (51
mm) I.D. spools with 60 lb. (27.2 kg) capacity. User
mounted to appropriately prepared boom framework.
Includes an easily adjustable friction brake for con-
trol of overrun.
When a 2" (51 mm) spindle is used with Readi-Reels
or coils not on 12" (305 mm) O.D. spools, an adapter
is required:
Coil Adapter:
K1504-1
Permits 50 lb to 60 lb (22.7-27.2 Kg.)
Coils to be mounted on 2” (51 mm) O.D. spindles.
K435 Permits 14 lb. (6 kg) Innershield coils to be
mounted on 2" (51 mm) O.D. spindles.
K468 Permits 8" (203 mm) O.D. spools to be
mounted on 2" (51 mm) O.D. spindles.
Readi-Reel Adapters:
K363P Adapts Lincoln Readi-Reel coils of elec-
trode 30 lb. (14 kg) and 22 lb. (10 kg) to a 2" (51
mm) spindle. Durable molded plastic one piece con-
struction. Designed for easy loading; adapter
remains on spindle for quick changeover.
K438 Adapts Lincoln Readi-Reel coils of electrode
50-60 lb. (22.7-27.2 kg) to a 2" (51 mm) spindle.
INPUT CABLE ASSEMBLIES:
K1501 (Control Cable Only) Consists of a 9-conduc-
tor control cable with a 14-pin control cable plug,
without electrode cable, and is available in lengths of
10 ft. (3 m), 17 ft. (5 m), 25 ft. (7.6 m), 33 ft. (10 m),
50 ft. (15 m) and 100 ft. (30 m).
K1502 Consists of a 9-conductor control cable with a
14-pin plug and a 3/0 (85 mm2 ) electrode cable with
stud terminal. It is rated at 600 amps, 60% duty
cycle and is available in lengths of 10 ft. (3 mm), 17
ft. (5 m), 25 ft. (7.6 m), 33 ft. (10 m) and 50 ft. (15 m)
and 100 ft. (30 m) is also available with a 4/0 (107
mm2) electrode cable.
K1503 Consists of a 9-conductor control cable with a
14-pin plug and 2/0 (67 mm2) electrode cable with
Twist-Mate™ connector. It is rated at 500 amps,
60% duty cycle and is available in lengths of 10 ft. (3
m), 17 ft. (5 m), 25 ft. (7.6 m), 33 ft. (10 m) and 50 ft.
(15 m) and 100 ft. (30 m) is also available with a 3/0
(85 mm2)electrode cable.
K1520-1 115V/42V TRANSFORMER
KIT
Required to use LN-10 with Lincoln Power
Sources without 42VAC auxiliary and a 14-pin con-
nector receptacle. These power sources include the
DC-250, DC-600, DC-1000 and Pulse Power 500.
Also can be used with older DC-400 models.
K590-4 WATER CONNECTION KIT
Includes water cooled gun tube fittings and self-seal-
ing outlet and inlet quick-connectors for mounting into
the DH wire drive connection box.
K659-1 GAS GUARD REGULATOR
Adjustable flow regulator with removable adjustor key
for CO2 and Argon blend gases. Mounts onto wire
drive gas inlet, and reduces gas waste and arc start
"blow" by reducing surge caused by excess pressure
in supply hose.
K1449-1 DUAL PROCEDURE
REMOTE CONTROL Includes a remote con-
trol box with a 16 ft. (5 m) length control cable with 4-
pin plug for the mating receptacle on the bottom of the
LN-10 control box. The remote control box contains a
procedure selector switch and 2 rotating knob
encoders, one controls arc voltage and the other con-
trols wire feed speed, which function the same as
comparable controls on the LN-10 front panel, when
the remote is connected and selected by the LN-10
Procedure Key.
LN-10
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC