Filter
Top Products
A-2
INSTALLATION
LN-10
A-2
WIRE DRIVE OR WIRE DRIVE SECTION OF FEEDER
SPEC.# TYPE LOW SPEED RATIO HIGH SPEED RATIO
Speed Wire Size Speed Wire Size
Solid Cored Solid Cored
K1563-1 10 Series 35-500 IPM .025 - 3/32 in. .035 - .120 in .50 - 750 IPM .025 - 1/16 in. .035 - 5/64 in.
Std Drive
Boom Mount (0.89-12.7 M/M) (0.6 - 2.4 mm) (0.9 - 3.0 mm) (1.25 - 19.0 M/M) (0.6 - 1.6 mm) (0.9 - 2.0 mm)
K1563-2 10 Series 55 - 825 IPM .025 - 1/16 in. .035 - 5/64 in. 80 - 1250 IPM .025 - .045 in. .035 - .045 in.
Hi-Speed
Boom Mount (1.40 - 21.0 M/M) (0.6 - 1.6 mm) (0.9 - 2.0 mm) (2.00 - 31.8 M/M) (0.6 - 1.2 mm) (0.9 - 1.2 mm)
K679-1 Synergic 7F* 50 - 770 IPM .025 - 1/16 in. .035 - 5/64 in. --- --- ---
Std Drive
Boom Mount (1.27 - 19.5 M/M) (0.6 - 1.6 mm) (0.9 - 2.0 mm)
K679-2 Synergic 7F* --- --- --- 80 - 1200 IPM .025 - .045 in. .035 - .045 in.
Hi-Speed
Boom Mount (2.00 - 30.5 M/M) (0.6 - 1.2 mm) (0.9 - 1.2 mm)
K1559-1 LN-10 35-500 IPM .025 - 3/32 in. .035 - .120 in. 50 - 750 IPM .025 - 1/16 in. .035 - 5/64 in.
Std Drive
Bench Model (0.89-12.7 M/M) (0.6 - 2.4 mm) (0.9 - 3.0 mm) (1.25 - 19.0 M/M) (0.6 - 1.6 mm) (0.9 - 2.0 mm)
K1559-2 LN-10 55 - 825 IPM .025 - 1/16 in. .035 - 5/64 in. 80 - 1250 IPM .025 - .045 in. .035 - .045 in.
Hi-Speed
Bench Model (1.40 - 21.0 M/M) (0.6 - 1.6 mm) (0.9 - 2.0 mm) (2.00 - 31.8 M/M) (0.6 - 1.2 mm) (0.9 - 1.2 mm)
CONTROLS, HEADS AND COMPLETE UNITS
SPEC.# TYPE INPUT POWER PHYSICAL SIZE• TEMPERATURE RATING
Dimensions
Height Width Depth Weight Operating Storage
K1562-1∆ LN-10 40-42 Vac + 10% 14.80 “ 14.20 “ 4.20 “ 18.0 Lbs
Control Controls 4.0 Amps 50/60 Hz (375.9 mm) ( 360.7mm) (106.7 mm) (8.2 Kg)
K1563-1∆ 10 Series 7.81 “ 14.71 “ 11.00“ 25.0 Lbs
Std Drive
Boom Mount (198.4 mm) (373.6 mm) (27.94 mm) (11.3 Kg)
K1563-2 10 Series
Hi-Speed
Boom Mount +40°C +40°C
to to
K679-1 Synergic 7F* 11.5“ 7.16“ 8.06“ 16.5 Lbs -20°C -40°C
Std Drive Boom Mount ( 285.8mm) (181.9 mm) (204.7mm) (7.5 Kg.)
K679-2 Synergic 7F*
Hi-Speed
Boom Mount
K1559-1 LN-10 40-42 Vac + 10% 20.46 “ 14.73 “ 30.35 “ 65.0 Lbs
Std Drive
Bench Model 4.0 Amps 50/60 Hz (519.7 mm) (366.5 mm) (770.9 mm) (29.5 Kg)
K1559-2 LN-10
Hi-Speed
Bench Model
TECHNICAL SPECIFICATIONS – LN-10 Head & Control
• Excluding Wire Reel
∆ Included with K1561-Series, LN-10 Boom Packages
*Synergic 7F wire drives use 4-roll drives with 2 driven rolls(Drive roll kits not common with 10 Series heads)
GENERAL DESCRIPTION
The LN-10 is a modular line of 42VAC input 4-roll wire feed-
ers. A single control with dual procedure presettability of
wire feed speed (in IPM or M/min) and arc voltage is used
with a single DC welding power source.
The LN-10 models have controls providing keypad or
remote selectability of either of two procedures.
The units offer 4 independently selectable gun trigger
modes for each procedure; cold feed, 2 step and 4-step trig-
ger and spot weld mode.
Also, 4 selectable, presettable timers for each procedure;
preflow, postflow, burnback and spot weld time.
Arc starting can be optimized for each procedure with 5
selectable wire feed acceleration rates, and independent
control of slower run-in procedure.
A gas purge key is provided, as well as cold feed forward
and reverse keys with independently adjustable forward
feed speed setting.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC