Filter
Top Products
ACCESSORIES
C-2C-2
LN-23P
OPTIONAL EQUIPMENT
GUN AND CABLE ASSEMBLIES
K350 ADAPTER KIT
Required when using the LN-23P on any constant
voltage power source. Either one or two LN-23Pʼs can
be connected to the Adapter. If two LN-23Pʼs are con-
nected, they can be set for different procedures. The
Adapter circuit is interlocked so only one LN-23P can
be used at a time.
K350-1Adapter Kit
The K350-1 is similar to the K350 but has a 14 pin
connector on the end of the control cable that will
interface with any Lincoln power source that utilizes a
14 pin connector for control.
Note: A K350 Adapter Kit is not required when con-
necting a LN-23P / K316l-2 (8pin connector) to
a V350-Pipe, V350PRO or V450PRO.
K-276 ENCLOSED WIRE REEL SUPPORT
Bolts to the LN-23P frame for feeding wire from stan-
dard 50 lb. Innershield coils. Includes enclosure and
door to keep the dirt out; also includes wire reel brake
assembly.
Type K-355-10* K-345-10* K-264-8 K-361-10 K-406*
Length: 10 feet 10 feet 8 feet 10 feet Linconditioner Gun 10 ft.
(15 ft. Exhaust Hose)
Rated Welding
Current: 250 Amps 350 Amps 250 Amps 350 Amps 350 Amps
Duty Cycle 60% 60% 60% 60% 60%
Electrode Sizes .068, .072, 5/64 .068, .072, 5/64 068, .072, 5/64 068, .072, 5/64 068, .072, 5/64
Reduced Speed
Switch Std. Std. None None Std.
Sizes 5/64 5/64 5/64 5/64 5/64
Nozzle Angle 90E 90E 62E 62E 68E
Weight 7.0 lbs. 89.3 lbs. 5.2 lbs. 7.5 lbs. 16.0 lbs.
* Recommended for pipe welding applications.
All guns include one each .068/.072 tip, 5/64 tip, and a thread protector**. The K-264-8 also includes an insulated guide for
3/4" to 1-1/2" stickout. The K-361-10 also includes an insulated guide for 2" stickout.** The K-406 includes an insulated
guide for 2" to 1" stickout, but no thread protector.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC