Filter
Top Products
Install the other blade
as
described above. Rotate the drum slowly while pressing the lock
plate to make sure there
is
nothing abnormal. Then close the chip cover and secure using
the hex bolt.
CAUTION
:
0
Do
not tighten the blade installation bolts without
the
blade locating lug
of
the
set
plate
correctly resting in the groove
of
the blade. This may cause damage to the blade and
potential injury to the operator.
Do
not turn the tool on with the chip cover open.
0
Tighten the blade installation bolts securely when installing the blades.
14