Filter
Top Products
Movement and transport
of
planer-jointer
When moving the tool, hold it
as
shown in
the figure. When transporting
it
by vehicle,
secure with
a
rope or other substantial
means to prevent tipping or movement.
Positioning the planer-jointer
Locate the tool in
a
well
lit
and
level
place
where you can maintain good footing and
balance. Bolt it to the workbench using
the bolt holes provided in the base.
When locating
it
without bolting, use the
stays provided to help maintain its stability.
Remove the two bolts which secure the
stays. Extend the stays by one bolt hole
and secure them using the bolts.
Installing the crank handle
Install the crank handle using the socket wrench provided.
Switch action
CAUTION
:
Before plugging in the tool, always be sure that the tool is switched off.
To
start
the tool, insert the key and press
the
ON
side of the switch.
To
stop it, press
the
OFF
side.
CAUTION
:
When not using the tool, remove the key
and store it in
a
secure place. This prevents
unauthorized operation.
6