Filter
Top Products
REMOVING
OR
INSTALLING THE JOINTER
CAUTION
:
Always be sure that the tool
is
switched off and unplugged before removing or installing
the jointer.
The jointer can be easily removed from the auto-planer.
You
can carry
it
by yourself.
1.
Removing the jointer
Loosen the right and left knobs. Pull the
jointer toward
you
as
shown in the
figure. The jointer can be removed.
When the jointer
is
removed, the pulley
cover will close automatically. If
you
lock the pulley cover in the open posi-
tion for some reason, be sure to close
it
by pushing the release button before
operating the auto-planer. Never operate
the auto-planer with the pulley cover
locked in the open position.
2.
Installing the jointer
Open the pulley cover until
it
will be
locked. Align the line on the pulley with
the pointer on the side cover (L).
-
Knob
I
Side
cover
(L)
Pulley cover
/--
,-Pointer
/=I
'
Line
\L'
Pulley
\\\
-
..
.
19