Multi-Tech Systems FF120 Saw User Manual


 
Chapter 7: Device Manager Operation
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 162
Saving a Configuration
Each type of device in the FaxFinder/CallFinder/MultiAccess family saves all of its settings (IP address,
password, modem parameters, DID channel parameters, phone book settings, etc.) internally. This group
of settings is its configuration. This same group of settings can be saved on the computer running the
Device Manager software. Once saved, the configuration can be retrieved from the computer and re-
installed onto the device using the
Restore Configuration command.
To save the configuration for a particular device, select the unit in the main Device Manager screen, right-
click on it, and select
Save Configuration. Choose the location at which the configuration file will be
stored and click
OK. Then, at the ‘confirmation’ screen, click OK again.