Filter
Top Products
Chapter 3: FaxFinder Server Software Screens
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 59
“Modem Configuration: POTS Modem” Screen Field Definitions (cont’d)
Field Name Values Description
Error Correction on, off By setting Error Correction to "on," you are
requesting that faxes be sent in an error-free
condition, which can be achieved only if the
remote fax machine with which you are
communicating also supports Error Correction
and has this feature enabled. The Error
Correction feature slows down fax transmissions.
If you are operating at speeds below 16,800 bps,
you can set Error Correction "off" to achieve
faster transmissions of faxes, although the
quality of the fax transmissions may be
compromised. However, if you have set the fax
baud rate to 16,800 bps or higher, then error
correction is automatically enabled.
Default = on.
Smart Dial on, off If set to “on,” the POTS modem will detect dial
tones and busy signals. If ‘no dial tone’
messages appear consistently, the Smart Dial
feature may be having difficulty detecting PBX
dial tone. In such cases, set Smart Dial to “off.”
Default = on.
Fax Direction both, inbound,
outbound,
In this field, you can set the FaxFinder to allow
only incoming faxes, only outgoing faxes, or to
allow both.
Modem Configuration Table
The Modem Configuration Table will display the settings for each modem as they were set. This is an
area that will let you know how each modem is set at a glance.
Columns displayed (in order, from left to right):
• Modem
• Country Code
• Answer On
• Max DTMF Digits
• Routing
• Routing Definition
• Fax ID
• Max Baud Rate
• Error Correction
• Tone Dial
• Smart Dial
• Dial Prefix
• Fax Direction
• Fax Debugging
• Init String