Filter
Top Products
PARALLEL INSTALLATION
EATON Powerware
®
9155 Parallel UPS (8–15 kVA) User’s Guide S 164201592 Rev C www.powerware.com
17
10. Verify that each UPS battery circuit breaker is in the OFF position
(see Figure 9).
ON
OFF
UPS Wiring
Access Cover
Conduit Landing
Battery
Connector
Battery Circuit Breaker
Figure 9. UPS Rear View (2-High Shown)
11. From each UPS, remove the UPS wiring access cover and retain
(see Figure 9).
12. Hardwire the UPS input terminations (TB1-1 through TB1-5) for
each UPS.
See Table 2 for specifications and Figure 10 for a detailed view of
the UPS terminal block.