Filter
Top Products
INSTALLING OPTIONS
EATON Powerware
®
9155 Parallel UPS (8–15 kVA) User’s Guide S 164201592 Rev C www.powerware.com
28
8. Secure the Powerware Hot Sync CAN Bridge Card with the screws
removedinStep2.
9. On the bottom cover (and also the middle cover if 3-high), remove a
knockout tab in the top edge of the cover for each cable:
With wire cutters, cut either side of the tab and twist down to
remove the tab (see Figure 20).
Figure 20. Removing Knockout Tabs
10. Route the cable(s) to the approximate location of the cover access
holes.