Filter
Top Products
20
Getting to Know Your Jointer/Planer
WARNING: For your own safety turn switch “OFF”
and remove plug from power source outlet before
making any adjustments.
1. Dust Chute with Tool Storage
Allows 4" diameter dust collection hose. Easily slides
up and out of the way when a vacuum is not con-
nected. Also tool storage for blade adjustment
wrenches.
2. Outfeed Table
The section of a jointer bed which supports the work-
piece after it passes over the cutter.
3. Fence Sliding Knob
Allows fence to move across table front to back. This
is done to achieve full width of cut or to use a different
(sharper) part of blade.
4. Belt Guard
Protects user from incidental access to the motor belt
and pulley.
5. Table Lock Screw - When desired, use these screws
to lock infeed or outfeed table at a desired height.
6. Depth of Cut Handwheel
By turning the handwheel you can control how much
wood will be removed from the workpiece on each
cut.
7. Fence Stops
When adjusted properly, these stops provide a
method for quickly moving the fence to a 90°, 45° or
135° position from the table.
8. Nameplate Model/Serial
9. Fence Tilt (Bevel) Knob
Locks fence in various bevel positions.
10. Fence - Guides workpiece over cutter head.
11. Fence Tilt Knob - Used to adjust fence angle posi-
tion.
12. Infeed Table
The section of the jointer bed upon which the work-
piece is placed before being pushed into the cutter.
Its height is adjustable which allows the operator to
select the depth of cut.
13. Cutter Head Guard
Helps protect the operator from the sharp knives on
the cutterhead. It is spring loaded so it automatically
keeps the cutterhead covered before, during, and
after a cutting operation. It must always be used.
14. Stop Pin
For rabbeting operations greater than 1/8" deep, pin
can be pulled out to lower infeed table in 1/8" incre-
ments.
13 Cutter Head
10 Fence
2 Outfeed
12 Infeed Table
16 On-Off
Switch
14 Stop Pin
Table
8 Nameplate
4 Belt Guard
6 Depth of Cut
7
Fence Stops
5 Table
9 Fence Tilt
(Bevel) Handle
Handwheel
Lock Screw
Outfeed Table
Model/Serial
3 Fence Sliding
Knob
Depth Indicator
Handwheel
1 Dust
Chute
Guard
11 Fence Tilt
Knob
15 Angle Gauge