Filter
Top Products
46
How to Use Your RIDGID Wood Lathe (continued)
Sanding, Buffing And Polishing
Using The Lathe To Sand Turnings
Turnings can be sanded with the lathe
running. A large sheet of sandpaper is
useful for smoothing cylinders. All other
sanding operations are done with a nar-
row strip of abrasive paper. The applica-
tion of the sandpaper strip is shown in the
illustrations. Care must be exercised in
order to prevent dubbing the corners of
beads, shoulders, etc.
WARNING: Remove tool rest
when sanding to prevent serious
personal injury.
Sandpape
r
Coves
Wood
Fibers
Sandpaper
6489c12wlEhalf_final.fm Page 46 Friday, April 25, 2003 3:40 PM