Filter
Top Products
25
d) Still holding the key, press the key; the display
will show:
e) Press the key to select Table 1 (European) or
Table 2 (American) default parameters; the display
will show:
f) Press the FUNC key; the display will show:
This indicates that the loading procedure has been
initiated. After about 3 seconds the procedure is com-
plete and the instrument reverts to the “COnF” display.
The following is a list of the default configuration param-
eters loaded during the procedure:
Default Configuration Parameter List
PARA. Table 1 Table 2
European American
L1 nbUS nbus
L2 1 1
L3 19200 19200
L4 8E 8E
r1 Type J Type J
(-100 to 1000 °C) (-150 to 1830 °F)
r2 ——. ——.
r3 -100 -150
r4 1000 1830
r5 0 0
r6 1 second 1 second
r7 uP uP
c1 Hi Hi
c2 1 0
c3 Auto Auto
c4 0 0
c5 1 second 1 second
P1 nonE nonE
P2 H.A. H.A.Ac
P3 rEV rEV
P4 OFF OFF
PF 1 second 1 second
n1 0 0
t1 10 seconds 30 seconds
7sl-4-00.p65 9/17/02, 2:42 PM25