Filter
Top Products
4
CAUTION:
USE WIRE SUITABLE
FOR 75°C MINIMUM.
NOTES
• For supply connections use No 16 AWG or larger
wires rated for at least 75 °C.
• Use copper conductors only.
• Class 2 wiring must be a minimum of 1/4 inch from
any Class 1 conductors.
Table of Contents
1/16 DIN, FOUR DIGIT HIGH/LOW LIMITROL..........2
Guide to simple set-up ......................................3
MOUNTING REQUIREMENTS..................................5
DIMENSIONS AND PANEL CUTOUT .......................6
WIRING GUIDELINES ...............................................7
PRELIMINARY HARDWARE SETTINGS ...............12
CONFIGURATION KEY FUNCTIONS .....................14
CONFIGURATION PROCEDURE ...........................14
OPERATING MODE ................................................20
Normal Display Mode .....................................20
Indicators ........................................................20
Key Functions in Normal Display Mode ..........21
Parameter Display Mode.................................21
Key Functions in Parameter Display Mode .....21
OPERATING PARAMETERS...................................22
ERROR MESSAGES ...............................................23
DEFAULT PARAMETERS ........................................24
SPECIFICATIONS ...................................................26
CALIBRATION PROCEDURE..................................30
General Guidelines .........................................30
Calibration Parameters ...................................30
Procedure .......................................................31
Entering Calibration Values.............................31
MAINTENANCE .......................................................35
7sl-0-00.p65 9/17/02, 2:35 PM4