Filter
Top Products
Operating Basics
10
TSG 601 User Manual
4. Once the desired CRC choices appear on the display, press
ENTER
to accept/invoke the selections.
5. Press any rectangular key to exit the CRC menu.
6. Toggle the inclusion of CRC data or errors on and off by pressing
the “CRC On/Off” key. The CRC status will be reported on the
second line of the display, alternating with the ID status.
Inserting ID Messages
H Toggle the ID message or cycle on and off with the “ID On/Off”
key.
Editing ID Messages
Please read “ID Messages” on page 19 before you first attempt to
edit a TSG 601 ID.
1. Enter the ID menu (press
Shift, then ID On/Off).
2. Press the
B key once to reach the “Edit ID #X” menu item. Note
that the ID# first shown on the display always indicates the
current (most recently recalled) ID.
3. Use the horizontal arrow keys to display the number of the ID
you want to edit, then press
ENTER.
4. Use the arrow keys to move the character cursor. Specify the
character with the letter keys; press
Shift to select symbols and
numbers. The “Sp” key will enter a space, blacking out the
underlying test pattern. The test pattern will show through a
“Blank” (Shift-SP).
5. When you have made all the desired changes, press
ENTER to save
them. (Note: pressing any rectangular key will abort the edit and
exit the ID menu.) If the ID message you started with in step 3
was “on-screen” when you began the edit, the new message will
take its place. If not, and you wish to insert the new message,
press the
Y key to reach the “Recall ID #X” menu item, select the
ID number with the horizontal arrow keys, and press
ENTER.
6. As usual, press any rectangular key to exit the ID menu.